Changes between Version 10 and Version 11 of 3D-Drucker

Timestamp:

Jun 12, 2021, 10:03:52 AM (5 years ago)

Author:

Johannes Lode

Comment:

--

3D-Drucker

@@ -20 +20 @@
 {{{
 make image PROFILE=tl-mr3020-v1 PACKAGES="-swconfig -uboot-envtools -dnsmasq -ip6tables -ppp -ppp-mod-pppoe \
--odhcpd-ipv6only -odhcp6c kmod-ledtrig-transient kmod-usb-serial-ch341 kmod-usb-serial-ftdi kmod-video-uvc ser2net \
-mjpg-streamer" DISABLED_SERVICES="ser2net mjpg-streamer" \
+-odhcpd-ipv6only -odhcp6c kmod-ledtrig-transient kmod-usb-serial-ch341 kmod-usb-serial-ftdi kmod-video-uvc kmod-gpio-button-hotplug ser2net \
+mjpg-streamer" DISABLED_SERVICES="ser2net mjpg-streamer slide-switch" \
 FILES=${PWD}/../gartenzwerg/imagebuilder-files/
 }}}
 * SW-Pakete (siehe auch oben): 
-  * Kernelmodule: kmod-ledtrig-transient, kmod-usb-serial-ch341, kmod-usb-serial-ftdi, kmod-video-uvc, 
-  * Programme: ser2net, mjpg-streamer
+  * Kernelmodule: kmod-ledtrig-transient, kmod-usb-serial-ch341, kmod-usb-serial-ftdi, kmod-video-uvc, kmod-gpio-button-hotplug, 
+  * Programme: ser2net, mjpg-streamer, slide-switch
   * USBIP wurde getestet, es ließen sich jedoch keine USB-Devices exportieren :-(
 * Konfiguration: tbd.