Changes between Version 11 and Version 12 of 3D-Drucker


Ignore:
Timestamp:
Jun 12, 2021, 10:05:53 AM (5 years ago)
Author:
Johannes Lode
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • 3D-Drucker

    v11 v12  
    1919* MR3020 mit OpenWRT tiny 19.07.7, erstellt mit dem Image-Builder (https://downloads.openwrt.org/releases/19.07.7/targets/ar71xx/tiny/openwrt-imagebuilder-19.07.7-ar71xx-tiny.Linux-x86_64.tar.xz):
    2020{{{
    21 make image PROFILE=tl-mr3020-v1 PACKAGES="-swconfig -uboot-envtools -dnsmasq -ip6tables -ppp -ppp-mod-pppoe \
    22 -odhcpd-ipv6only -odhcp6c kmod-ledtrig-transient kmod-usb-serial-ch341 kmod-usb-serial-ftdi kmod-video-uvc kmod-gpio-button-hotplug ser2net \
    23 mjpg-streamer" DISABLED_SERVICES="ser2net mjpg-streamer slide-switch" \
     21make image PROFILE=tl-mr3020-v1 \
     22PACKAGES="-swconfig -uboot-envtools -dnsmasq iptables -ip6tables -ppp -ppp-mod-pppoe -odhcpd-ipv6only -odhcp6c \
     23firewall kmod-ledtrig-transient kmod-usb-serial-ch341 kmod-usb-serial-ftdi kmod-video-uvc kmod-gpio-button-hotplug \
     24ser2net mjpg-streamer slide-switch" \
     25DISABLED_SERVICES="ser2net mjpg-streamer" \
    2426FILES=${PWD}/../gartenzwerg/imagebuilder-files/
    2527}}}