Changes between Version 3 and Version 4 of TasmotaDevicesEinrichtung

Timestamp:

Aug 13, 2020, 11:22:07 AM (5 years ago)

Author:

Johannes Lode

Comment:

--

TasmotaDevicesEinrichtung

@@ -1 @@
-= Erst-Einrichtung für Tasmota-Devices
+= Einrichtungskommandos für Tasmota-Devices
 
 [[PageOutline(2-6)]]
@@ -11 +11 @@
 }}}
 
+== Gerätetyp einstellen
+
+=== Yunshan 10A 7-30VDC Relay
+
+**Achtung:** Module 33 nicht verwenden, Input ist lokale Taste, kein Switch-Eingang
+
+{{{
+Module 18
+Template {"NAME":"Yunsh ETS4308i","GPIO":[0,148,158,149,21,9,0,0,255,255,255,0,255],"FLAG":15,"BASE":18}
+Module 0
+}}}
+
+== Netzwerk-Konfiguration
+
+=== WIFI-Config
+{{{
+Backlog ssid1 IOS42backup; password1 strAveRAtICTInIsOdISCaPH; ssid2 bms21KXHUcWro4FU; password2 jjEmughekWKTbFtzLMLLviqzxtv9szX
+}}}
+
+=== Hostname einstellen
+
+{{{
+Backlog Hostname dev14.mqtt.p21.net; SetOption53 1
+}}}
+
+=== IP-Configuration
+{{{
+Backlog IPAddress1 172.16.0.214; IPAddress2 172.16.0.22; IPAddress3 255.255.255.0; IPAddress4 172.16.0.22
+}}}
+
+  IP adresse:: `IPAddress1 172.16.0.214`
+  GW:: `IPAddress2 172.16.0.22`
+  Netmask:: `IPAddress3 255.255.255.0`
+  DNS Server:: `IPAddress4 172.16.0.22`
+  NTP-Server:: `Backlog TimeZone 0; NtpServer1 ntp.p21.net`
+
+=== MQTT Konfiguration
+
+{{{
+Backlog mqtthost <mqtt_broker_address>; mqttport <mqtt_broker_port>; mqttuser <username>; mqttpassword <password>; topic <device_topic>
+}}}
+
+==== Telefon-Station ETS-4308i
+{{{
+Topic ets4308i
+GroupTopic vQF7I8v6
+MqttHost muecke.p21.net
+MqttClient ESP8266_%06X
+MqttUser ETS4308i-vdH4Lus5
+MqttPassword skHSeuXrJkDR7VXu88XD3SKMszDs0QGS
+TelePeriod 60
+SetOption2 1
+SwitchTopic 0
+Backlog Prefix1 cmd; Prefix2 feedback; Prefix3 log; FullTopic device/sonoff/%topic%/%prefix%/
+Rule1 1
+Rule1 on Mqtt#Connected do Backlog Subscribe door_bell1,actuator/device/ETS4308i/door-bell1; Subscribe door_bell2,actuator/device/ETS4308i/door-bell2; Subscribe alarm_call,actuator/device/ETS4308i/alarm-call endon
+}}}