Changes between Version 4 and Version 5 of BatterieSpeicher

Timestamp:

Sep 22, 2023, 12:12:00 PM (2 years ago)

Author:

lode

Comment:

--

BatterieSpeicher

@@ -16 +16 @@
 
 
-== Seplos V2 10E und Neeey-Balancer Einstellungen
+== Seplos V2 10E BMS und Neeey-Balancer Einstellungen
 
 Hier geht es zum [[SeplosV2-10E-Verhalten|Seplos V2 10E Verhalten]].
@@ -26 +26 @@
 || Cell overvoltage protection ||  3.66 V||
 || Cell overvoltage protection return ||  3.60 V||
-|| Total voltage overvoltage protection ||  57.80 V||
+|| Total voltage overvoltage protection ||  57.60 V||
 || Total voltage overvoltage recovery ||  57.50 V||
 || Total voltage high voltage alarm ||  57.00 V||
@@ -39 +39 @@
 || Total voltage High Voltage Alarm ||  ON  ||
 
-== Deye Sun-12k-SG04LP3 Parameter
+== Deye Sun-12k-SG04LP3 Batterie-Lade-Parameter
 
-|| Parameter-Name ||  Wert  ||
-|| //charge voltage limit// unabhängig von \\ "Total voltage overvoltage protection" ||  57.00 V||
-|| //absorption voltage// ||  56.20 V||
-|| //absorption time// ||  >30 min||
-|| //xxx// ||  xx V||
+|| Parameter (-Name) ||  Wert\\(Batterie)  ||  Wert\\(pro Zelle für 16s)  ||
+|| //charge voltage limit// unabhängig von \\ "Total voltage overvoltage protection" ||  57.00 V||  3.5625 V||
+|| //absorption voltage// \\ CV-Charge-Phase ||  56.80 V||  3.55 V||
+|| //absorption voltage// \\ optional niedriger für längere Sättigungsphase\\(Absorption, CV-Charge) ||  55.20 V||  3.45 V||
+|| //absorption time// \\(>30 min, Seplos-BMS nutzt diese Zeit für den 100%-Reset)\\(der Balancer arbeitet in dieser Zeit) ||  60 min||  60 min||
+|| //float voltage// ||  54.00 V||  3.375 V||
+|| //float voltage// \\ optional niedriger... ||  53.60 V||  3.35 V||
+|| //equalization// ||  off / float voltage||  never for LFP||
+|| //low temperature cut-off// ||  5 °C||  5 °C||
+|| //xxx// ||  xx V||  xx V||